Scruffy Teddy

A clean Print of a Scruffy Teddy. using 3 colours. Project: scruffy teddy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x136.67mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.68mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #658697 PLA Overture Gray Blue Transmission Distance: 6.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray Blue At layer #12 (1.04mm) swap to Jade White for the rest.