SCX10 Trans Mounted Electronics Plate

I installed a Hobbywing Fusion SE and it only left me with a receiver and power button to mount so I whipped this up to mount them easily. You will need 2mm longer m3 bolt for the top one ( make sure it's not too long or it will hit the slipper/slipper eliminator), a 4mm longer bolt for the bottom one that has a nut (this one can be any length, nothing to hit), and some double sided tape. The holes are to zip tie wires to if needed. Disregard the random 3d printed rails, it is an aftermarket scx10 transmission in it. I installed the bottom one with a nut first, you can have it pulled away from the transmission to tighten the bolt and nut easier. Then I hinged it down onto the transmission and did the top bolt.