SCX30 Weight Hanger

.4 nozzle is possible but must use a very VERY thin wall width to achieve correct slicing. I used a .4 nozzle for mine. .2 nozzle would be ideal but not necessary. Once printed it is a press fit onto a FACTORY knuckle, i have not test any other knuckles. I have only tested FACTORY wheels/tires. Since these essentially “press on”, they can be clocked at different angles! The lower void can then be packed/filled with tungsten putty or whatever you came come up with(it’s not much). Once full, i add multiple drops of super glue to the putty from both sides to stiffen everything. I was able to achieve 1.1grams PER side, or a total of 2.2grams total added. Not huge, but neither is the truck!!!