SCX6 Front Bumper

I made the bumper from ASA and an 8mm nozzle but I also added a profile with a 4mm nozzle. Mounting posts are attachable/ detachable so if they break then there is no need to reprint the whole bumper, just the posts. I have tested it.99% infill for the mounting posts Make sure to sand mounting posts really good so they will easily be removable. Use 2 - M4 x 21 screws to attach the posts through the 2 holes on the bottom of the bumper. Ream any holes out with a drill.2- M3 x 18 screws for shackles Added a print profile made with PA6 GF for bumper and posts.