Slicer Discord
Scyrox V8 Bottom Shell Replacement & Weight Mod – Modello 3D stampabile da MakerWorld MakerWorld
Electronics

Scyrox V8 Bottom Shell Replacement & Weight Mod

33 Download
8 Likes
6 Makes
Vai al Modello
Bottom Shell for Scyrox V8This replacement shell has 3 variants (all weights given for my calibrated PLA prints):Normal Shell: comes in at around 5.7g and has no holes. - "Stable"Light Shell: comes in at around 5.25g, has holes that are covered with thin layers. - “Hybrid”Superlight Shell: comes in at around 5.0g, has holes. - “Lightweight”For comparison, my original bottom shell of the Scyrox V8 Mouse came in at 6.5g.AssemblyJust place the PCB onto the holes, exactly as with the original bottom shell. Screw in the four original screws and turn them until they squeeze the PCB a little bit - that is enough. The PCB should sit tight. The front part should sit on the front screw holes, without space between PCB and the screw hole. Now put the mouse back together. Do not overtighten the screws.IF your PCB wobbles up and down in the front, take it out and bend it downwards a bit before inserting it again. SkatesI recommend to use Dot-Skates instead of full sized skates with the ligh
Categoria
Electronics
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA, Polycarbonate
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione