Thingiverse
SD and Micro SD Card Holder Mount
by Lanec77
4
Downloads
5
Likes
0
Makes
Another Mount for the SD card adapter and micro SD card. I mounted this on the Anycubic Mega zero 2.0
Just remove the 2 bolts and install the 2 frame bolts in the holes.
The stock screws were a bit short. You can either get longer screws or remove the lock washer. Once I removed the lock washer I was able to get the screws to catch the threads.
Print in the orientation of the SD card sitting vertically as it would if mounted onto the machine. I printed mine with a brim to increase adhesion. A raft or brim would suffice
Just remove the 2 bolts and install the 2 frame bolts in the holes.
The stock screws were a bit short. You can either get longer screws or remove the lock washer. Once I removed the lock washer I was able to get the screws to catch the threads.
Print in the orientation of the SD card sitting vertically as it would if mounted onto the machine. I printed mine with a brim to increase adhesion. A raft or brim would suffice
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!