Thingiverse

SD-Card Box

by Leonaldo

21 Downloads

14 Likes

1 Makes

Hey there!

I wanted to create a simple and functual SD-Card Box. And heres the result!
My SD-Card Box has three SD-Card slots and four Micro SD-Card slots.
It can be printed without support in 3:15h.

Nozzle Temp.: 200°

Bed Temp.: 60°

Print Speed: 50 mm/s

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

15 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does SD-Card Box need supports when printing?

No supports needed for SD-Card Box — it's designed to print clean off the bed.

How long does it take to print SD-Card Box?

According to the design notes, SD-Card Box takes approximately 15 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SD-Card Box available in?

SD-Card Box is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SD-Card Box free to download?

Yes, SD-Card Box is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

SD-Card Box

Similar Models

Add to Collection