SD Card Case Vase Mode

Could not really find the SD card case I wanted. found a close one but long print lots of plastic. so I made my own all in vase mode.

to print this use single outline vase mode with a 1.2mm floor I printed mine at 0.3mm layer height so 4 bottom layers 0 top layers 1 perimeter vase mode.

if you print at 0.2mm use 6 bottom layers 0 top layers 1 perimeter vase mode.

If the fit is loose increase extrusion multiplier (or increased flow rate on the printer 3 or 4 %) I printed mine with proto pasta imperfect pasta at 1.0 and it came out perfectly on my Fookos Odin with 0.4mm nozzle 220c 100% fan at 3 65mm/s fixed

its rigid because of selectively places ribs and "fusion" points do NOT scale the model or you will break the fusion points though can't think of a reason why you would scale this then SD cards won't fit anymore :-)

The slots are also vase mode so they are "compliant" meaning nice loose fit but they also "grip" so you can invert it and SD cards won't fall out. because