Thingiverse
SEA SWEEP
di al_mooring
7
Download
11
Likes
0
Makes
parts to make a sea sweep or sea swirl. sea swirl is untested but used two double lip seals in the top section. haven't really got the time to help people with this one but it should be self explanatory., has adapters to fit jebao and tunze powerheads.
you need a few parts like:
10rpm 12v motor. the chinese motors with the square gearbox on them.
pwm dc speed controller. i like the small ones that are built into the dial which is then bolted upto the side with the reverse switch
some wire
dc barrel jack
m3 bolts
25mm pvc tube for the shaft
6mm stainless countsunk bolts to hold the bracing adpater to the seasweep
rc car rod ends for the shaft between small and large arm. this will be custom and you will have to make the length to suit yourself. i did 20mm between rod ends
you need a few parts like:
10rpm 12v motor. the chinese motors with the square gearbox on them.
pwm dc speed controller. i like the small ones that are built into the dial which is then bolted upto the side with the reverse switch
some wire
dc barrel jack
m3 bolts
25mm pvc tube for the shaft
6mm stainless countsunk bolts to hold the bracing adpater to the seasweep
rc car rod ends for the shaft between small and large arm. this will be custom and you will have to make the length to suit yourself. i did 20mm between rod ends
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
