Thingiverse
Seashell Fossil 3D Scan
door DIY_3D_Scanner
1
Downloads
1
Likes
0
Makes
5cm seashell fossil, scanned using my DIY 3D Scanner, in "Modified Version of FlexScan3D".
For this scan I used my DIY 2-axis turntable, for automatic calibration and scanning process.
The turntable allows for automatic positioning and alignment of scans, so these small objects can be easily scanned in some few minutes.
You can watch the whole of the calibration and scan process in my Youtube Channel: https://www.youtube.com/watch?v=ODXyrpIBA0c&t=28s
The uploaded mesh (.stl file) is the raw scan result, I only decimated it to reduce its size for uploading.
if you are interested to make your own professional DIY 3D Scanner, join us on Telegram: https://t.me/DIY_3D_Scanner
The mesh (.stl file) is the raw scan data without any edition, I only decimated it to reduce its size for uploading.
For this scan I used my DIY 2-axis turntable, for automatic calibration and scanning process.
The turntable allows for automatic positioning and alignment of scans, so these small objects can be easily scanned in some few minutes.
You can watch the whole of the calibration and scan process in my Youtube Channel: https://www.youtube.com/watch?v=ODXyrpIBA0c&t=28s
The uploaded mesh (.stl file) is the raw scan result, I only decimated it to reduce its size for uploading.
if you are interested to make your own professional DIY 3D Scanner, join us on Telegram: https://t.me/DIY_3D_Scanner
The mesh (.stl file) is the raw scan data without any edition, I only decimated it to reduce its size for uploading.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
