Slicer Discord
Seashell Towel Holder – Modello 3D stampabile da MakerWorld MakerWorld
Other House Models

Seashell Towel Holder

45 Download
24 Likes
14 Makes
Vai al Modello
Towel holder with foldable design and seashell faceplate. Available on my website at: cor310.com/store/p/seashellSmall size is for hand towels, whereas the original is designed to hold a bath towel.The small is around 40mm (1.57") tall and the large size is 81mm (3.14") tall.MOUNTING HARDWARE:I used #8x1-¼" screws and plastic drywall anchors that came in this kit:https://www.amazon.com/Plastic-Self-Drilling-Threaded-Self-Tapping-Mounting/dp/B086ZK7RBF/ INSTALLATION:Before assembling, use a stud-finder to check if you will be mounting to drywall.Align the bracket piece on the wall with the screw holes facing out and the pin hole at the bottom.Mark the holes, insert drywall anchors if needed, then assemble the parts and secure both screws.To assemble, place the bracket into the shell with the notch facing up, then push the hinge pin through. PRINTING DETAILS:This was designed and tested for printing with a 0.2mm nozzle at 0.1mm layer height.The larger seashell will probably p
Categoria
Other House Models
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
layer da 0.10mm
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 2/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA
Altezza layer
0.1 mm
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Stesso designer, più piattaforme

COR∃ 10 pubblica anche su

11 modelli aggiuntivi su altre 1 piattaforme

Verificato dalla corrispondenza dei titoli dei modelli tra le piattaforme.
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

1 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione