Seattle Mariners Hueforge

Seattle Mariners hueforge. Print profile is for NON-AMS, has manual breaks at the layers. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA Overture Matte Black Transmission Distance: 0.1PLA HueForge Navy Blue 1.3 Transmission Distance: 8PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA PolyTerra Arctic Teal Transmission Distance: 0.5PLA Overture Matte White Transmission Distance: 3.7Swap Instructions:Start with BlackAt layer #10 (0.88mm) s