Secure Cable Guide for Duplicator i3 and Maker Select V2 Printers

Format not displaying correctly? Try switching your browser to Chrome and pressing CTRL+Shift+R (Command+Shift+R on Mac) to clear the page's cache.

Background
----------------------

For those who have been using OctoPi or connecting to your printer's serial, it can be very easy for the connection to timeout due to a bad fit between the board and the connector. By using this secure cable guide, there is almost no movement due to an interference fit between the cable and the 3D printed part. This means no more lost connections due to a loose cable!

Here is the cable I used for connecting the printer's board to the Pi, it is recommended to get a shielded one with a ferrite core:
https://www.amazon.com/gp/product/B003L18RZU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Assembly
--------------------------------------------
* Place the cable in to the 3D printed part so only the micro USB is showing (not any of the cable).
* Using super glue, lightly apply it to the face of t