Thingiverse

Self-centering tapered-thread Z-axis coupling [v2] – Bild 1

Self-centering tapered-thread Z-axis coupling [v2] – Bild 2

Self-centering tapered-thread Z-axis coupling [v2] – Bild 3

Self-centering tapered-thread Z-axis coupling [v2] – Bild 4

Self-centering tapered-thread Z-axis coupling [v2]

von loco

4.6k Downloads

2.5k Likes

78 Makes

Zum Modell

This is a remake of my self-centering z-coupler (http://www.thingiverse.com/thing:396781)

The thread is now optimized for 3D printing and the overall length is way smaller. It's also a parametric design, so i can easily generate different sizes.

I made 4 different sizes for 5mm motor shaft and 5, 6, 8 or 10mm threaded rod.
You can just ask me, if you need different sizes.

----------------
12/24/14: Added coupler_5_12, coupler_6_12 and nut_12

----------------
10/17/15: Added [V2.5] coupler 6.35/8mm + nuts

----------------
12/16/15: Added [V2.5] coupler 5/3, 5/4, 5/7 + nuts

----------------
02/04/16: Added [V2.5] coupler 5/6.35

----------------
03/12/16: Added [V2.5] coupler 5/5

----------------
05/26/16: Added [V2.5] coupler 5/8

10mm 5mm 6mm 8mm Centering coaxial Conical coupler nut self taper tapered thread z axis Z Coupler 10mm 5mm 6mm 8mm Centering coaxial Conical coupler nut self taper tapered thread z axis Z Coupler 10mm 5mm 6mm 8mm Centering coaxial Conical coupler nut self taper tapered thread z axis Z Coupler 10mm 5mm 6mm 8mm Centering coaxial Conical coupler nut self taper tapered thread z axis Z Coupler

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat