Self Watering - Arch Pattern - Planter

This is one of my first 3D-printable planter designs. The planter has an 80mm inner diameter and stands approximately 100mm tall. Without the drainage base, it measures around 65mm in height. The design is split into three parts: the planter, a connector piece, and a drainage base. The planter and connector piece need to be glued in place. No supports are required for printing. Warning: Be wary of scaling up the model, as there is a overhand on the base for the locking mechanism. Scaling it up might cause the overhangs to fail. For the self-watering feature, you will need a quarter-inch cotton rope. This can be omitted if you prefer to use the planter as a standard drainage pot. Applying a clear coat is recommended for added protection and improved water resistance. Originally designed and printed with Bambu Labs P1s, 0.4mm nozzle, 0.2 layer height, and in PLA.