Thingiverse
Sensor Wheel 401 Fix
door mp3dprnt
3
Downloads
3
Likes
0
Makes
Mod for 3DWOX 1 that helps to alleviate discrepancies in the filament jam error code of 401 that pops up. Please go to the Sindoh 3D Printer Support group on Facebook for help regarding the removal of the extruder assembly. Also, watch this video with other provided clips on Sindoh's playlist for more details. https://youtu.be/21jT8e5GPHI
Installation details:
- The injection-molded wheel has a rubber insert, pull out this insert and place it in the 3D printed wheel. The extruder assembly has small white clips, to remove use needle-nose pliers or tweezers and push the clips out. The installation process takes around 30 mins to an hour to install. Takes intermediate skill or above.
Safety:
- Before opening side covers/panels unplug the printer and press the power button down to discharge the capacitors in the power supply and mainboard. You will hear an audible click after 10 secs, then you can proceed to take apart the printer. Do not create an ESD to the mainboard, as this w
Installation details:
- The injection-molded wheel has a rubber insert, pull out this insert and place it in the 3D printed wheel. The extruder assembly has small white clips, to remove use needle-nose pliers or tweezers and push the clips out. The installation process takes around 30 mins to an hour to install. Takes intermediate skill or above.
Safety:
- Before opening side covers/panels unplug the printer and press the power button down to discharge the capacitors in the power supply and mainboard. You will hear an audible click after 10 secs, then you can proceed to take apart the printer. Do not create an ESD to the mainboard, as this w
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!