Sephiroth (FF7) - HueForge Print

Everyone's favourite One-Winged Angel, now HueForged to perfection. The FF7 Remake / Rebirth version of Sephiroth is so pretty, I cannot NOT print him. This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps. The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below! If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmFilaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA BambuLab Basic Red Transmission Distance: 5PLA CC3D Lemon Yellow Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #7 (0.68mm) swap to RedAt layer #11 (1mm) swap to Lemon YellowAt layer #