Sequential Shifter

3D Printed USB Sequential Shifter for Driving Simulator BOM 3D PRINTED PARTS: 2 pcs Side Panel 1 pc Base Revised 2 pcs End Braces 2 pcs Magnet Stops 2 pcs Magnetic Flap 1 pc Shift Lever 1 pc Shift Ball 4 pcs Mounting Nut Hold Downs HARDWARE: 1 pcs 6mm Female Rod End (Heim Joint) 1 pc M6-1.0 x 70mm Threaded Rod 1 pc M8-1.25 x 250mm Threaded Rod 1 pc 10mm x 120mm Aluminum Tube 1 pc 6mm x 50mm Aluminum Tube 12 pcs 10mm x 3mm Rare Earth Magnets 10 pcs M4 x 55mm Pan Head Phillips Screws 12 pcs M2.2 x 13mm Phillips Head Screws 10 pcs M4 Nuts 6 pcs M6 Nylock Nuts 4 pcs M6 Washers 4 pcs M5 x 25mm Socket Head Screws 1 pc M6 x 30mm Socket Head Screw 4 pcs 5mm x 10mm x 4mm Ball Bearings 4 pcs 6mm x 12mm x 5mm Ball Bearings 2 pcs 8mm x 25mm Springs ELECTRONICS: 2 pcs Micro Limit Switch w/ Roller Lever Arm 1 pc USB Zero Delay Joystick Encoder or Arduino Pro Micro OPTIONAL SIDE MOUNT: There are optional files included for side mounting this shifter. They are labeled as side mount and won't be used in the bottom mount option.