Sequre ES126 Screwdriver Grip & Trigger

I really liked the original model by Majarspeed but wanted to print the grip out of TPU. The open-sided design wasn't a good match for TPU as it didn't stay on the screwdriver body, so I modified it to be a full sleeve. If you don't want the full grip, the included trigger mounting ring can also work. This is also intended to be printed out of TPU. Two versions of the trigger arm are provided. The original is very sensitive which can be a good thing or a bad thing. My preference is the “Less Sensitive” variant that requires the trigger to be fully squeezed before it activates the button. Printing InstructionsAll parts are oriented for printing without supports.Grip: print in 95A TPU with 0.2mm layer height and 3 perimeters. Infill of 10-20% is fine. Mine was printed on a Bambu P1S with the “0.2mm - Standard” profile and generic TPU settings.Trigger: print in PLA or ABS (you want this to be pretty stiff) with 0.16-0.2mm layer height, 4 perimeters, and 5 top/bottom layers for strength. A