SER 5 MAX Stackable Case

A stackable case for a SER 5 MAX from beelink.

I wanted to make my own little low(ish) powered rack. Decided to go With some mini pcs. Wanted to give it a bit better cooling so made up a model to replace the default case. Comes in 3 components; the main case, a bottom piece that is half height to give some extra air flow for the bottom (the cpu fan is now at the bottom), and a lid to finish the top of the stack.

Tolerances aren't amazing, but it works okay. I use 3mm wide, 4mm m2 deep brass screw inserts for the standoffs. I think the default screws are ~M1.6 so its a bit different. Feel free to contact me if you want the original 360 models to make adjustments.

Note on non-3d print components:

- 3mm wide by 4mm deep brass inserts for the screws
- Fan is a [Noctua NF-A12x25 5V](https://noctua.at/en/products/fan/nf-a12x25-5v) to plug into USB
- Controller is a [Noctua NA-FC1](https://noctua.at/en/na-fc1) to adjust fan speed via PWM

Note on SER5 PRO: will mostly fit but