Servo Arm for Auto Level

Thanks to Bryan for the source code! Please go see the original source files for this, Bryan made it very easy. There is other code in there for SG/MG90 servos and related items, if you need to figure out those dimensions in OpenSCAD.

This remix is for the Servo Arm. I use it on a Folger Tech 2020 i3 Prusa.

It's made for a microswitch with 2mm mounting holes spaced 6mm apart. Edit the code to change that if you need (in the section labeled // Holder screwholes ) Example switches: http://www.amazon.com/Momentary-Hinge-Lever-Micro-Switch/dp/B008SO0IGQ/ref=sr_1_3?ie=UTF8&qid=1444758567&sr=8-3&keywords=microswitch

On the very last line, change the ## for length. Example here is 61mm ( switch_arm(61);) . I moved the holes closer to the edge so that there is enough overhang for the microswitch past the arm.

Printed with 30% infill. Doesn't really matter. Just don't get a switch that has "snap" in the description, you want a microswitch with barely any resistance so that