Thingiverse
Servo Crawler 1:24
by MindsCombind
18
Downloads
20
Likes
0
Makes
The Successor to my previous 3D Printed crawler. Now fully printed, this RC crawler has been 2 months in the making. Powered by four 9g servos, this 1:24 Crawler packs power and agility to put its predecessor to shame. One motor and gearbox per wheel makes for a TRUE 4x4 setup.
Some parts, such as the links, will need the holes drilled out to fit the used Screws, this allows them to have slack on the screw. Most holes require 2.5mm screws, however some do require 2mm to 3mm screws.
If the part has a number on the end of its name, this corresponds to the number of times the part needs to be printed. Most if not all of the parts will have to be adjusted for a good print or to fit in the build plate.
Parts used.
40a ESC with eBrake.
https://www.amazon.com.au/Loach-Brushed-Electronic-Speed-Upgrade/dp/B0BBFC2HWR/ref=sr_1_2_sspa?crid=CF5JAD4ULZ8I&keywords=40a+esc&qid=1665627891&qu=eyJxc2MiOiIxLjgyIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=40a+%2Caps%2C2062&sr=8-2-spons&p
Some parts, such as the links, will need the holes drilled out to fit the used Screws, this allows them to have slack on the screw. Most holes require 2.5mm screws, however some do require 2mm to 3mm screws.
If the part has a number on the end of its name, this corresponds to the number of times the part needs to be printed. Most if not all of the parts will have to be adjusted for a good print or to fit in the build plate.
Parts used.
40a ESC with eBrake.
https://www.amazon.com.au/Loach-Brushed-Electronic-Speed-Upgrade/dp/B0BBFC2HWR/ref=sr_1_2_sspa?crid=CF5JAD4ULZ8I&keywords=40a+esc&qid=1665627891&qu=eyJxc2MiOiIxLjgyIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=40a+%2Caps%2C2062&sr=8-2-spons&p
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!