Thingiverse
Servo Light Switch
von soapsrx
14
Downloads
17
Likes
0
Makes
Turn your wall switch into a smart switch using this faceplate. Lights can be controlled via Home assistant.Two servos and a ESP32CAM board.
Components needed:
* ESP32-CAM (Any ESP32 Board will work)
I am using an esp32 cam board because i bought a board with a faulty camera.
* Two Servos (Need servo horns and screws supplied with it)
* 5v Power Supply
* M3 Screws / M3 Brass Knurls
* 3.5x1.3mm DC jack (Enclosure hole size = 7.8mm )
Additional Info
Code and Schematics :
https://www.hackster.io/tharindusrt/servo-light-switch-1ff492
Components needed:
* ESP32-CAM (Any ESP32 Board will work)
I am using an esp32 cam board because i bought a board with a faulty camera.
* Two Servos (Need servo horns and screws supplied with it)
* 5v Power Supply
* M3 Screws / M3 Brass Knurls
* 3.5x1.3mm DC jack (Enclosure hole size = 7.8mm )
Additional Info
Code and Schematics :
https://www.hackster.io/tharindusrt/servo-light-switch-1ff492
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
