Sewable 5mm LED mount
por ArizonaClark
249
Descargas
220
Likes
1
Makes
I needed a way to mount a standard 5mm LED onto my "wearable" project (a Santa hat). I created this little sewable mount, and printed it with NinjaFlex (I used "Semitransparent White", http://www.adafruit.com/product/2445 printed at 100% fill).
There's a groove inside to hold the ridge on a 5mm LED. The hole in the middle is tapered to ease insertion from the side with the mounting ears.
These mounts are NOT designed for use with conductive thread. You'll have to use a more conventional wiring technique, like wire wrapping, soldering, or crimp connectors.
By the way, the LED in the picture with 4 leads is an addressable LED, https://www.sparkfun.com/products/12986 that is compatible with Adafruit's Neopixels.
There's a groove inside to hold the ridge on a 5mm LED. The hole in the middle is tapered to ease insertion from the side with the mounting ears.
These mounts are NOT designed for use with conductive thread. You'll have to use a more conventional wiring technique, like wire wrapping, soldering, or crimp connectors.
By the way, the LED in the picture with 4 leads is an addressable LED, https://www.sparkfun.com/products/12986 that is compatible with Adafruit's Neopixels.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!