Thingiverse
Sewing Machine Timing Tool
di T0MEK
100
Download
101
Likes
0
Makes
This is tool to set sewing needle to the bobbin timing on the sewing machine.
For tool usage look here: "youtu.be/ZoxxVepXr0k?t=1237" (video is not made by me - but I recommend this and other videos from "In Stitches" on YouTube).
#Instructions:
- You will need M3 screw for "Cramp part" assembly.
- I would recommend Cramp v1 - strength it is more than enough.
- Print with "Extrusion Width" set manually to 0,5mm (even with on 0,4mm nozzle).
- Layer height 0,15mm but 0,2mm should be also OK.
- Cramp v2 is stronger but will need supports.
- Scale "Gauge part" in Z axis to get exact height you need (2.5mm in the design but not all printers are equal).
Please leave feedback and post your printed parts.
For tool usage look here: "youtu.be/ZoxxVepXr0k?t=1237" (video is not made by me - but I recommend this and other videos from "In Stitches" on YouTube).
#Instructions:
- You will need M3 screw for "Cramp part" assembly.
- I would recommend Cramp v1 - strength it is more than enough.
- Print with "Extrusion Width" set manually to 0,5mm (even with on 0,4mm nozzle).
- Layer height 0,15mm but 0,2mm should be also OK.
- Cramp v2 is stronger but will need supports.
- Scale "Gauge part" in Z axis to get exact height you need (2.5mm in the design but not all printers are equal).
Please leave feedback and post your printed parts.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!