Thingiverse
Shaft clamps
par joni_2005
9
Téléchargements
20
Likes
0
Makes
Variety of shaft clamps with 10x3mm magnets.
The 22.6mm one (Fox Grip1-2 damper) has a lip added, with it it's easy to change basevalve shimming while the damper is still in the fork.
I'll add more clamps here as I need new sizes.
For easy storage, arrange the magnets so that the clamp halves attract each other!
-07/2024 Added 12mm clamp
-05/2025 Updated 8mm clamp to have a bit more loose alignment tolerances (0,8mm instead of 0,5). Works better with flimsy vices.
-05/2025 Added angled 8mm clamp. My new vice is too small for Öhlins TTX shock, angled clamps help. Use supports when printing, prioritize smooth clamping surfaces!
-07/2025 Added simple steerer tube clamp (28.6mm).
The 22.6mm one (Fox Grip1-2 damper) has a lip added, with it it's easy to change basevalve shimming while the damper is still in the fork.
I'll add more clamps here as I need new sizes.
For easy storage, arrange the magnets so that the clamp halves attract each other!
-07/2024 Added 12mm clamp
-05/2025 Updated 8mm clamp to have a bit more loose alignment tolerances (0,8mm instead of 0,5). Works better with flimsy vices.
-05/2025 Added angled 8mm clamp. My new vice is too small for Öhlins TTX shock, angled clamps help. Use supports when printing, prioritize smooth clamping surfaces!
-07/2025 Added simple steerer tube clamp (28.6mm).
joni_2005 publie également sur
4 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !