SHAMPOO (Ranma 1/2)

Project: Shampoo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 118.8x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Azul Oscuro Transmission Distance: 0.3 PLA Bambulab Basic Cian Transmission Distance: 2 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Azul Oscuro At layer #7 (0.64mm) swap to Cian At layer #9 (0.8mm) swap to Marine Blue At layer #13 (1.12mm) swap to Lilac Purple At layer #16 (1.36mm) swap to Latte Brown At layer #19 (1.6mm) swap to Beige At layer #25 (2.08mm) swap to Jade White for the rest.