shanks

Project: shanks.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Jade White At layer #19 (1.6mm) swap to Red At layer #27 (2.24mm) swap to Indigo Purple At layer #30 (2.48mm) swap to Jade White for the rest.