Thingiverse
Shape Sorter for Babies!
von gregsan
34
Downloads
33
Likes
1
Makes
Shape Sorter for Babies!
Print video here:https://imgur.com/a/JPzRM2B
For babies 6mths and up. A large heavy base with five blind holes that fit different shapes into it. All shapes have filleted edges for safe play!
Drop beads, beans, rice, etc into the infill as it prints to give the parts weight as well as a nice maracas effect!!! You will not regret it.
Print with your best filament--marble PLA turned out AMAZING.
-Grid or rectilinear infill, >=8% for base and >=10% for the shapes. I really do recommend to drop in some beads, beans, rice, etc into the infill.
-At least 3 walls
-At least 3 bottom layers and 3 top layers. Please use at least 5 top layers for the Base object to ensure nice smooth top layer. You don't want to end a 12hour print with a bad top surface.
-0.20mm layer height. 0.30mm should work but not verified. The holes/shapes have >1mm tolerance.
Base object is 190x170mm and about 210g of filament, while shapes are about 20g each.
Print video here:https://imgur.com/a/JPzRM2B
For babies 6mths and up. A large heavy base with five blind holes that fit different shapes into it. All shapes have filleted edges for safe play!
Drop beads, beans, rice, etc into the infill as it prints to give the parts weight as well as a nice maracas effect!!! You will not regret it.
Print with your best filament--marble PLA turned out AMAZING.
-Grid or rectilinear infill, >=8% for base and >=10% for the shapes. I really do recommend to drop in some beads, beans, rice, etc into the infill.
-At least 3 walls
-At least 3 bottom layers and 3 top layers. Please use at least 5 top layers for the Base object to ensure nice smooth top layer. You don't want to end a 12hour print with a bad top surface.
-0.20mm layer height. 0.30mm should work but not verified. The holes/shapes have >1mm tolerance.
Base object is 190x170mm and about 210g of filament, while shapes are about 20g each.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!