MakerWorld
Hueforge & Lithophane
Zum Modell
Shark 2
26
Downloads
25
Likes
9
Makes
Shark 2 hueforged Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Beige At layer #14 (1.2mm) swap to Orange At layer #15 (1.28mm) swap to Yellow At layer #16 (1.36mm) swap to Jade White for the rest.
Michele MM3D veröffentlicht auch auf
424 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
