MakerWorld

Hueforge & Lithophane

shark attack hueforge

di Michele MM3D · Hueforge & Lithophane

38 Download

42 Likes

17 Makes

hueforged shark attack Here you can find all my HueForge creations, https://makerworld.com/en/@MicheleMM3D/collections/503504 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.

shark attack mm3d hueforge hueforged sea picture photo multicolor draw deco frame decor decorations animal fish 2d 3d wall art

Categoria

Hueforge & Lithophane

Fonte

MakerWorld

Pubblicato

29.04.2024

Aggiornato

30.04.2026

Cosa serve per stampare: Principiante Media affidabilità

Perché?

2 colori

Pezzo unico 2 colori / AMS

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file

STL

Materiale

PLA

Piano min.

130 mm (Medio)

Colori

2 (AMS/MMU consigliato)

Software

Cura, PrusaSlicer o simile

Stesso designer, più piattaforme

Michele MM3D pubblica anche su

424 modelli aggiuntivi su altre 1 piattaforme

MakerOnline

424 modelli

♥ 56,057 ↓ 138,583

Ancora nessuna valutazione

Ancora nessun commento – sii il primo!

Modelli simili

1 Suggerimenti

shark attack hueforge

Modelli simili

Aggiungi alla collezione