Thingiverse
SHELF LEG / SUPPORT
von 008LABS
19
Downloads
35
Likes
0
Makes
SHELF SUPPORT
I had a racking shelf with a large void over a label printer, decided to design a support to suit an offcut of laminate shelving i had to be able to make use of the void space.
The shelf is constructed using 2 x shelf supports & (in my case) 1 x laminated length of shelf measuring 600x200x15.5 mm.
No fasteners or glue required as the shelf was designed to be a snug fit into the supports, and printed as such.
Print settings:
- 0.24mm layer height
- 3 walls
- 3% infill, 3D honeycomb
- 3h12min print time
Parts in pictures printed using grey eSun pla+ filament.
I had a racking shelf with a large void over a label printer, decided to design a support to suit an offcut of laminate shelving i had to be able to make use of the void space.
The shelf is constructed using 2 x shelf supports & (in my case) 1 x laminated length of shelf measuring 600x200x15.5 mm.
No fasteners or glue required as the shelf was designed to be a snug fit into the supports, and printed as such.
Print settings:
- 0.24mm layer height
- 3 walls
- 3% infill, 3D honeycomb
- 3h12min print time
Parts in pictures printed using grey eSun pla+ filament.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!