Shelly 1 Box

Looking for a way to house your low voltage Shelly 1 or Shelly 1PM project? Hopefully this model will help! Simply print the ShellyBox file to hold your relay, then whichever version of the lid that you prefer.

Box:

Print in “normal” orientation with 3 perimeters/walls. No supports or brim required.



Lid:

Print with the top face on the build plate and 3 perimeters/walls. No supports or brim required.
Two versions are offered - one w/ a WiFi logo, the other plain. You can use whichever you like better! As the lid relies on a snap fit, it may be necessary to scale to lid very slightly to obtain the desired fit depending on the clearance tolerances of your printer
For the version w/ the WiFi logo, the Insert file can also be printed to add an accent color. You could, of course, leave the logo open for a vented look if you wish. Your choice! Simply use a couple drops of super glue or epoxy to affix the Insert to the inside face of the lid.


Insert:

This piece is sym