Shelving Mount

Hi all, I designed a 3 part wall mounted shelving arm.

It takes 3/4 inch thick, 6 inch wide panels as the main shelf and can be mounted either on dry walls or concrete walls using 2 3/16 inch screws. Make sure you get a screw length thats long enough to pass thru the mount and into the wall.

Assembly is pretty straight forward.
*Measure, mark and drill your top hole location.
*Attach one screw with the mounting part and make sure it's level before marking the next hole. You can do this just to be precise. But if you're in a hurry you can mark the bottom hole 30mm from the top. Screw and tighten everything up!
*Glue the 2 arms together and slide it on the mounting part and you're done! (The tricky part would be leveling the two mounts together, and you need to cut a little square piece of the top panel you're attaching so that it remains flush with the arms)

**I recommend 2 arms for every 2-2.5ft of shelving length. This is measured outisde-outside of each mount.
And the lo