Shendrones Flaco TINY SHARK Pod

Inspired by May Day FPV's Floss 2.1 Turtle Fin Canopy I designed a canopy for my Shendrones FLACO fleet.

The design is split into two parts, so when you remove the canopy, the AXII and Rx antenna mount can stay in place. The AXII mount will also work fine with a dipole or a Vee VTX antenna.

I use the pod with a one PDB RacerStar StarF4S 30A AIO, FrSky XSR and IRC Tramp, so I designed it flat, but you might be able to use a double stack (4in1 ESC + FC) if you keep it low.
The pod should generally work for other frames with a 40x40 spacer distance too.

There are two files for the pod, due to the different mounting hole to lens distances I use.
The Foxeer version has the camera mounting holes moved back by 1.8mm. (The lens on my micro predator protrudes 11.2mm from the mounting holes)
The supported camera angles are 30° to 55°, using the lower angles you might see the props even in a streched Flaco.


I printed the design with Hobbyking Flexible (TPU) and Taulman 645 (PA)