Slicer Discord
Shepherds Whistle – 3D-Druckmodell von Thingiverse Thingiverse

Shepherds Whistle

8 Downloads
11 Likes
0 Makes
Zum Modell
Instructions for use


Place the whistle in the mouth with the fold on the inside.
Hold it firmly with your lips closed surrounding the whistle.
Place your tongue against the back of the whistle to stop air from going under the whistle.
Your teeth should not touch the whistle.
Take a short breath of air and exhale from the diaphragm.
The whistle must be totally sealed all the way around.
Air must pass through the top hole only.
Vary the tone/pitch by raising and lowering your tongue.

___
Explanation
>A shepherd's whistle is a specialized, modulatable, variable-pitch whistle used to train and transmit commands to working dogs and other animals. Unlike other whistles, they are placed inside the mouth. The pitch is controlled by the placement of the tongue; physically, shepherd's whistles are vessel flutes with the tongue forming one side of the resonating chamber, and controlling its size. Like tin whistles, while simple, they can be used as musical instruments in their ow
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

SmileyPrinter veröffentlicht auch auf

40 zusätzliche Modelle auf 3 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

2 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen