shieldmaiden

hi this is my first go of hue forge please rate it but be kind. i used all bambulab filament and if anyone can give me advice to be better at hue forge i would be most grateful thank you. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 92.09x187.09mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #8b9398 PLA bambulab basic gray Transmission Distance: 5 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to gray At layer #8 (0.72mm) swap to Cobalt Blue At layer #9 (0.8mm) swap to Jade White for the rest.