Shoe/Computer/Adjustable Shelf

This shelf works with the A1 mini by using the diagonal of the build plate to get a long support bracket. I printed this in PETG but PLA+ should work as well. I would not recommend PLA silk for this structural piece. Shoe shelf would be better with a longer piece of wood with the intention of sandals/slippers/kids shoes on the bottom. You can also use this standoff shelf for coffee makers, computer monitors. The top of the shelf is 97 mm (3.8") tall. Build Plate: Recommend to use a smooth build plate for the A1 mini. This will be the top surface of your shelf. Supports Only required for the A1 mini. Be careful on removal of the supports. The top piece is thin and flexible. Additional materials needed:Wood: 19mm thick (¾") x 230 mm wide (9") and has long as you want. Illustrated is 250 mm (~10 inches) board. You can probably go as far as 600 mm (~24") before needing a middle support depending on your wood type. Install instructions Some light sanding of the wood/plank bo