Shoe Rack

This shoe rack allows up to four pairs of standard size shoes to be placed neatly together. Boots can be placed on the top shelf only. I have given the option to label where shoes are placed, for example - dad's, mum's, daughter's or sons. Plain card can be cut up and inserted into each slot. The complete rack is made from 8 printed parts and held together using dowel mouldings (and glue for added strength). There are two parts that make up each side and held together using 30mm x 10mm dowels. The label bar is made up of two parts that slot together and require glueing. They slot into the sides and don't require glue. Once the two sides and the label bars are in place, the wooden dowel mouldings can be cut to size and inserted. These are for resting the shoes on. I have given an approximate length to cut to. They should be cut after the label bars have been inserted, to ensure the round moulding is not cut too short. The four shoe bars require a very small dab of glue a