Shoe Rack

These are two 3D printed pieces that act as the support/frame of the shoe rack. The wood that I used measures 3.5" x .75" (this is the base dimensions however I did apply a couple coats of paint and finish so the actual dimensions might be a little larger). I cut the wood to a length of 4' but this can really be anything you'd like.

Printed this on a CR-10 S5 with a 1mm nozzle. Took around 12 hours for 1 piece. 20% infill seems to be plenty enough to not cause the piece to break under stress. Might want to have more than 1 wall (I think I used 3).

Enjoy!