Thingiverse
SHooSH a modified WSPR
by fixitanyway
4
Downloads
2
Likes
0
Makes
These are the additional parts you need to print the experimental "SHooSH" blaster, with 3d printed plunger tube and barrel, from my fixitanyway youtube video.
https://youtu.be/xLvaiCYSz24
If you are interested in the printed plunger tube assembly itself and want to modify it, an IGES file is included.
You'll need:
(1) to refer to Captain Slug's original for the main assembly instructions - http://captainslug.com/nerf/WSPRAssembly.pdf
(2) Hardware, which in this version consists of:
- three types of printed pin (see "clip" files) the longest goes through the centre of the catch mechanism
- two screws to hold "Ring_W2" in place; and
- A couple of O-rings of a suitable size
https://youtu.be/xLvaiCYSz24
If you are interested in the printed plunger tube assembly itself and want to modify it, an IGES file is included.
You'll need:
(1) to refer to Captain Slug's original for the main assembly instructions - http://captainslug.com/nerf/WSPRAssembly.pdf
(2) Hardware, which in this version consists of:
- three types of printed pin (see "clip" files) the longest goes through the centre of the catch mechanism
- two screws to hold "Ring_W2" in place; and
- A couple of O-rings of a suitable size
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
