Thingiverse
Shopkeeper
von Horstwursti
0
Downloads
0
Likes
0
Makes
This page is Work in progress!!!
This is the Base enclosure for a selfmade PoS-Cashier-System with Article-Database, based on the RaspberryPi as CPU.
There are two other missing parts because the used Hardware is not final and a complete change of these parts is possible! They will be uploaded when the used Hardware is final.
There are Two different files. I have made a "slim" version caused on the big baseplate. By reducing the Baseplate to this I was able to reduce my printing time from over 24h to 13h18m!
The project itsself is non-public and will maybe opened to the public later. But you can Download and Tweak the enclosure to Build your own PoS-System. Have Fun!
This is the Base enclosure for a selfmade PoS-Cashier-System with Article-Database, based on the RaspberryPi as CPU.
There are two other missing parts because the used Hardware is not final and a complete change of these parts is possible! They will be uploaded when the used Hardware is final.
There are Two different files. I have made a "slim" version caused on the big baseplate. By reducing the Baseplate to this I was able to reduce my printing time from over 24h to 13h18m!
The project itsself is non-public and will maybe opened to the public later. But you can Download and Tweak the enclosure to Build your own PoS-System. Have Fun!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!