Thingiverse
Shore Aggressor
by Delta_Makes
112
Downloads
77
Likes
1
Makes
This is a 28mm scale Coastal/River boat intended for use with the Konflikt 47 game system, but do whatever.
EDIT: I've uploaded a larger turret with a bigger gun, this is meant to upgrade the middle gun. I know it will not fit in the rear gun placement.
I've labeled it as a WIP because I haven't done any final test prints yet. I'll remove the WIP status when I do and find everything to be satisfactory.
Print with supports (should be easy to remove, I made sure of that), otherwise, I'm unsure if any particular print settings are required, I print at .1 layer height and it works just fine.
The open space towards the rear is for an anti-air mount.
This is my own personal design, but I drew heavy inspirations from the Bronokater Soviet Armoured Patrol Boat
EDIT: I've uploaded a larger turret with a bigger gun, this is meant to upgrade the middle gun. I know it will not fit in the rear gun placement.
I've labeled it as a WIP because I haven't done any final test prints yet. I'll remove the WIP status when I do and find everything to be satisfactory.
Print with supports (should be easy to remove, I made sure of that), otherwise, I'm unsure if any particular print settings are required, I print at .1 layer height and it works just fine.
The open space towards the rear is for an anti-air mount.
This is my own personal design, but I drew heavy inspirations from the Bronokater Soviet Armoured Patrol Boat
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
