Short Lamp Base

Short Lamp Base   *Lamp shades are uploaded separately** add a manual supports to the inner ring only. the rest of the model does not require supports. please see image for inner ring coloured purple, select manual supports and use smart fill angle at a low percentage to select the ring only. set top z distance to 0.275, this is already done in the 3mf If using the H2D id highly recommend using a support interface with specific support material for a super clean finish. (a tall vertion is also avallible on my profile) Below are a couple of examples of the light fitting. for this base you will need the fitting with a power cord that exits the side. 0.2 layer height, 15% infill although you can lower to 10% filaments ive used are PLA marble in white from Bambu https://www.amazon.co.uk/gp/product/B0B9S8DDQY/ref=ox_sc_act_title_1?smid=A1KVL6GEISMJFV&psc=1 https://www.amazon.co.uk/Klarlight-Bottle-Adaptor-Fittings-Electric/dp/B0BY2L8J82/ref=sr_1_6?dib=eyJ2IjoiMSJ9.khEiekVDWag6qRi