Shorter Control Knob

I love this part, but the height of the knob gets in the way when you use the twirly, so I shortened the knob. When printed in Anycubic Green I have to reduce to 97% scale to get a perfect fit. The included supported version has already been reduced to 97%. I realize the supports are very dense, but I like to print at the very minimum exposure time with tranlucent resins to avoid bleed. You could get away with much less with an opaque resin. Print settings below are for Photon S and Anycubic Green Translucent resin at 60F:

Bottom exposure time = 60
Bottom layers = 3
Normal exposure time = 4
Off time 1.5
Resolution .05