Thingiverse
Shower Door Guide
door mr_milo
3
Downloads
1
Likes
0
Makes
My shower door guide kept breaking so I would cut off the broken part and put it back. Well it finally got so small that it didn’t work and I couldn’t find anything like it in the stores.
I decided to measure the original one and use FreeCad to design a replacement. When I first designed it I assumed the bottom was flat, however once I printed a test piece I discovered that it had a slight slope towards the tub. I then modified the design (not in the best or most elegant way) and got it to fit perfectly.
I highly suggest that you print a test piece that's about 10mm long and test fit. I have included my FreeCad file if adjustments need to be made.
It was printed in white eSun PTEG and has held up really well since it was installed in late August (now late December).
I decided to measure the original one and use FreeCad to design a replacement. When I first designed it I assumed the bottom was flat, however once I printed a test piece I discovered that it had a slight slope towards the tub. I then modified the design (not in the best or most elegant way) and got it to fit perfectly.
I highly suggest that you print a test piece that's about 10mm long and test fit. I have included my FreeCad file if adjustments need to be made.
It was printed in white eSun PTEG and has held up really well since it was installed in late August (now late December).
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!