Thingiverse
Shower head holder
door F71P5Y
5
Downloads
3
Likes
0
Makes
Printer: Ender 3 Pro with BLTouch
Slicer: Cura
Layer Height: 0.2mm
Line Width: 0.4mm
Infill: 25%
Infillmultiplier: x5
Infillpattern: Cubic Subdivision
Hotend Temp: 225°C
Bed Temp: 50°C
Support: Yes
Designed for a pipe with a diameter of 19mm. All neccessary parameters are changebale in the parameter section in fusion.
Additionally i used following parts:
- two threaded inserts M3 (Dimensions: 4.6x5.7mm)
- two M3x10mm bolts
- one threaded insert M5 (Dimensions: 7.1x9.5mm)
- one M5x60mm bolt
Slicer: Cura
Layer Height: 0.2mm
Line Width: 0.4mm
Infill: 25%
Infillmultiplier: x5
Infillpattern: Cubic Subdivision
Hotend Temp: 225°C
Bed Temp: 50°C
Support: Yes
Designed for a pipe with a diameter of 19mm. All neccessary parameters are changebale in the parameter section in fusion.
Additionally i used following parts:
- two threaded inserts M3 (Dimensions: 4.6x5.7mm)
- two M3x10mm bolts
- one threaded insert M5 (Dimensions: 7.1x9.5mm)
- one M5x60mm bolt
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
