MakerWorld

Pets

shrimp cave

by jason · Pets

83 Downloads

22 Likes

41 Makes

Go to Model

stackeble shrimpcaves for aquarium 1 hour print time . no support . print upwards. i use outer brim

shrimp aquarium shrimp cave shelter aquarium cave aquarium aquarium accessories stackable fish shrimps

Category

Pets

Source

MakerWorld

Published

31.01.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Polycarbonate

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does shrimp cave need supports when printing?

No supports needed for shrimp cave — it's designed to print clean off the bed.

How long does it take to print shrimp cave?

According to the design notes, shrimp cave takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is shrimp cave available in?

shrimp cave is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is shrimp cave free to download?

Yes, shrimp cave is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

shrimp cave

Similar Models

Add to Collection