shroom?

roject: AI shroom.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.1mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Meta White Transmission Distance: 8 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA Overture Matte Light Blue Transmission Distance: 1.8 PLA Sunlu Meta red Transmission Distance: 7 PLA Sunlu Green Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Sunlu Matte Blue Transmission Distance: 3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite Pro Purple Transmission Distance: 1This print uses 10 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #12 (1.04mm) swap to Grey At layer #16 (1.36mm) swap to Light Blue At layer #21 (1.76mm) swap to red At layer #25 (2.08mm) swap to Green At laye