Side by Side Clamp

Side by side clamp to add picatinny rail

Picatinny rail possible sources:
https://www.thingiverse.com/thing:23185
https://www.thingiverse.com/thing:1314182
https://www.thingiverse.com/thing:5547856

I used 1.75mm filament PETG with 0.4mm nozzle.

I printed hardware and the thumbscrew with 100% infill.
The printed hardware is for picatinny rail attachment and It can be replaced by metal one..

With the thumbscrew, I used metal screw from which I cut the head.
But you can keep the head if there is enough lenght, in this case it will be fully lateraly crossing the clamp. In fact, there is several possibilities here.

Other parts of the clamp (left and right parts) and the rail are printed with 50 % infill.

Brim and supports are used for all parts except for the rail that needs no support.

Orientation is shiwn as per Cura slicer picture